Buying a used car?  Our 80+ Point Pre-Purchase Inspection goes far beyond our standard free checkup — flat $200, same-day report.
Learn More →
Dan and Gage Sager at the Hunter Engineering alignment machine. Sager & Sons Auto, Boise, ID
Boise Wheel Alignment & Suspension
Precision
Alignment.
Hunter-Certified.
Pulling to one side? Uneven tire wear? Rough ride? Our Hunter Engineering alignment system gives us factory-level precision on every vehicle, and we show you the before-and-after printout so you can see exactly what was corrected.
🎯
Hunter Engineering System Industry-leading alignment technology used by dealerships nationwide, right here on the Boise Bench.
Hunter Alignment System
Before & After Printout
3-Year / 36,000-Mile Warranty
Schedule Your Drop-Off

Wheel Alignment & Suspension in Boise, ID

Hunter Engineering precision, the same system used by dealerships

If your car pulls to one side, your steering feels loose, or you're burning through tires faster than you should, it's usually an alignment issue, a suspension issue, or both.

Boise roads, potholes, curbs, winter wear, and everyday driving can knock things out of spec over time. When alignment or suspension gets ignored, it doesn't just feel annoying, it can turn into uneven tire wear, reduced braking control, and costly repairs.

We show you before and after.

At Sager & Sons, we inspect the full system and show you what's actually going on, so you can fix what matters and skip what doesn't. Our Hunter system prints a report so you see the numbers yourself.

Vehicle on Hunter Engineering alignment rack at Sager & Sons Auto in Boise, ID

What This Service Includes

Every alignment and suspension visit covers the following

🎯

Alignment Check & Adjustment

Full 4-wheel alignment check with Hunter Engineering system. Adjustments made as applicable to bring your vehicle back to factory spec.

🔍

Steering & Suspension Inspection

We inspect key wear components, tie rods, ball joints, control arms, bushings, and flag anything that needs attention.

🛞

Tire Wear Pattern Evaluation

Tire wear tells a story. We read that story and show you what it means for your alignment and suspension health.

📋

Before & After Printout

You leave with a printed report showing exactly where your alignment was and where it is now. No guessing, no vague answers.

📱

Digital Inspection Notes & Photos

Complimentary digital inspection with photos sent straight to your phone, so you can see what we see.

🔎

Pulling, Vibration & Handling Check

We check for pulling, shimmy, vibration at speed, and handling concerns, and trace them to the source.

Signs You May Need Alignment or Suspension Repair

Don't ignore these, they tend to get worse and more expensive over time

Your car pulls left or right on a straight road
Steering wheel is off-center when driving straight
Uneven or fast tire wear on one side
Shaking or vibration at speed
Clunking noises over bumps
"Bouncy" ride or nose-diving when braking
Poor handling or loose, wandering steering
You hit a pothole, curb, or had recent suspension work

Why These Problems Shouldn't Be Ignored

Small alignment and suspension issues rarely fix themselves

Alignment and suspension issues don't usually fail all at once. They start small, a slight pull, uneven tire wear, a minor vibration, and gradually get worse over time.

When left unaddressed, these problems can lead to:

Premature tire wear, sometimes thousands of miles early
Reduced steering control and longer stopping distances
Increased strain on ball joints, tie rods, and control arms
Vibration that damages other steering components
Higher repair costs down the road

In some cases, worn suspension parts can affect stability during braking, cornering, or emergency maneuvers. Catching these issues early is almost always less expensive than replacing tires or multiple suspension components later.

Frequently Asked Questions

Wheel alignment & suspension, straight answers

How often should I get a wheel alignment?
A good rule is once a year, whenever you replace tires, or anytime you notice pulling or uneven wear. If you hit a significant pothole or curb, it's worth checking sooner.
What happens if I ignore alignment problems?
You can burn through tires fast, reduce handling control, and put extra stress on steering and suspension parts. It often costs more to fix later than fixing it early.
How do I know if it's alignment or suspension?
Alignment issues often show up as pulling, off-center steering, or uneven tire wear. Suspension problems can cause clunking, bouncing, loose handling, or vibration. We inspect both so you're not guessing.
How long does an alignment or suspension inspection take?
Most checks and alignments can be done within an hour or two. If worn parts are found, we'll show you what we found and give you clear options before any additional work is done.
Is it safe to drive with suspension issues?
Some issues are annoying but manageable. Others, clunking, shaking, or a vehicle that feels unstable, are worth getting checked sooner rather than later. If something feels off, trust that instinct and bring it in.

Why Boise Drivers Choose Sager & Sons

Hunter Engineering System
Industry-leading alignment technology used by dealerships nationwide, right here on the Boise Bench, operated by our own ASE-certified technicians.
Before & After Printout
You get a printed report showing exactly where your alignment was and where it is now. Full transparency, no guesswork.
Complimentary Digital Inspections
Photos, videos, and notes sent to your phone, so you can see what we see and make decisions with confidence.
ASE-Certified Technicians
Every service is performed by trained, certified experts. Dan has been ASE Master Technician certified since 2004.
3-Year / 36,000-Mile Warranty
Every qualifying repair is backed by our NAPA AutoCare nationwide warranty, honored at 14,000+ locations across the U.S.
Family-Owned & Operated
We're not a chain. We treat every car like it's our own, and every customer like a neighbor, because on the Boise Bench, they usually are.

Ready to Straighten Things Out?

Honest alignment service with a Hunter printout so you see exactly what was fixed.

📍 6126 W. Franklin St., Boise, ID  ·  📞 (208) 761-9406  ·  Mon–Fri 8am–5pm
Schedule Your Drop-Off

Oil Change Service

Your engine’s first line of defense. We use premium oil and filters suited to your make, model, and driving habits.

Transmission Fluid Exchange

Keep shifting smooth and prevent transmission failure by replacing worn fluid before it breaks down.

Coolant / Antifreeze Service

Over time, coolant loses its ability to protect your engine from heat and corrosion. We’ll flush and refill it to restore balance.

Brake Fluid Flush

Moisture contaminated brake fluid can cause corrosion and reduced stopping power. We replace it for safe, responsive braking.

Power Steering Fluid Service

Fresh steering fluid keeps your steering smooth and quiet, preventing premature pump or rack wear.

Differential & Transfer Case Service

Critical for trucks and AWD vehicles clean gear oil protects bearings and gears under heavy loads.

Sager & Sons Auto in Boise, Idaho

Proud Member of

© Copyright 2026. Sager & Sons Auto LLC All Rights Reserved.

📞 Call Us 📅 Book Drop-Off